home *** CD-ROM | disk | FTP | other *** search
/ The Arsenal Files 1 / The Arsenal Files (Arsenal Computer).ISO / novell / mhs183.exe / SYS.EXE / README.DOC < prev    next >
Text File  |  1993-08-03  |  23KB  |  550 lines

  1.  
  2. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
  3. *                            NETWARE MHS 1.5                          *
  4. *                Copyright (C) 1991-1993 by Novell, Inc.              *
  5. *                             RELEASE NOTE                            *
  6. *                           July 30, 1993                             *
  7. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
  8.  
  9.  
  10. NetWare(R) MHS(tm) Personal Edition
  11. Software v1.5P  Revision D
  12.  
  13. The NetWare MHS Personal edition software uses the Standard Message
  14. Format (SMF) to provide DOS-based messaging services on standalone DOS
  15. workstations.  NetWare MHS transfers information including addresses,
  16. text, and other data from an MHS-compatible application or gateway to
  17. applications and gateways at other locations.  MHS uses a
  18. store-and-forward communications method, which transports messages
  19. across a broad range of data-communications networks.  Other
  20. applications provide services - such as electronic mail - that allow
  21. users to create and process messages.
  22.  
  23. This revision of NetWare MHS v1.5 includes public hub support.  It
  24. allows users of MHS-compatible applications to communicate with each
  25. other through third-party hub services such as the CompuServe MHS
  26. Service.
  27.  
  28. Please read this entire release note before upgrading your NetWare MHS
  29. software.
  30.  
  31. If you have any questions or comments, please contact:
  32.  
  33.    Customer Support Response Center
  34.    Novell, Inc.
  35.    2180 Fortune Drive
  36.    San Jose, CA 95131
  37.  
  38. If you need information about the Novell mail hub (NHUB) or about
  39. registering your workgroup, call the Messaging Hotline at the following
  40. number:
  41.  
  42.    (408) 473-8989
  43.  
  44. To register your workgroup, you can send an MHS mail message to
  45. hubadmin@NHUB.  In the message, include your workgroup name, your
  46. contact phone number, and the name of the contact person in your
  47. organization.
  48.  
  49. If you need technical support, call one of the following numbers:
  50.  
  51.    (800) NETWARE
  52.    (801) 429-5588
  53.  
  54. For other information, send a fax to the attention of the MHS Product
  55. Manager at the following number:
  56.  
  57.    (408) 433-9827
  58.  
  59. For support using the CompuServe MHS Service, you can call CompuServe
  60. directly at:
  61.  
  62.    CompuServe US Customer Service
  63.       Within US (toll-free) - 800-848-8990
  64.       Outside US - (614) 457-8650
  65.  
  66.    CompuServe UK Customer Service
  67.       Within UK (toll-free) - 0800-289-378
  68.       Outside UK - (44) 272-255111
  69.  
  70.    CompuServe Europe Customer Service
  71.       Within Germany (toll-free) - 0130-37-32
  72.       Within Switzerland (toll-free) - 155-31-79
  73.       Outside Germany and Switzerland - (49) (89) 66550-111
  74.  
  75. Or, you can send mail to:
  76.  
  77.    SUPPORT@CSERVE
  78.  
  79. from an MHS site connected to CompuServe, or
  80.  
  81.    >MHS:SUPPORT@CSERVE
  82.  
  83. from other CompuServe Mail products.
  84.  
  85. For information on how to send mail from MHS to CompuServe mail, please
  86. read the <mv>\MHS\SYS\MANUAL.DOC file.
  87.  
  88.  
  89. COMPONENTS
  90. ----------
  91.  
  92. NetWare MHS v1.5 Rev. D (Personal edition) consists of these components:
  93.  
  94. o       README.TXT (this release note)
  95.  
  96. o       UPGRADE.EXE
  97.  
  98. o       EXE.EXE
  99.  
  100. o       SYS.EXE
  101.  
  102.  
  103. SYSTEM REQUIREMENTS
  104. -------------------
  105.  
  106. The NetWare MHS v1.5 Rev. D (Personal edition) upgrade requires
  107. the following hardware and software:
  108.  
  109. o       A DOS workstation running NetWare MHS v1.5P, Rev A or Rev B.
  110.  
  111. If this copy of the Personal edition will be using an asynchronous
  112. connection on the client workstation, it also requires the following:
  113.  
  114. o       An available serial communications port (COM1,
  115.         COM2, COM3 or COM4)
  116.  
  117. o       A modem from the list of modems in the section "Communication
  118.         Enhancements and Improvements."
  119.  
  120. o       CompuServe User-ID and Password for each host that
  121.         will be connecting to CompuServe
  122.  
  123.  
  124. UPGRADING YOUR HOST
  125. -------------------
  126.  
  127. The following sections describe the steps you must perform before
  128. and after upgrading your host from an earlier revision of NetWare MHS
  129. v1.5.
  130.  
  131. Before Upgrading Your Host
  132. --------------------------
  133.  
  134. 1.      Stop Mail Processes. Stop all mail processes (Connectivity
  135.         Manager, secondary Transport Servers and applications).  If you
  136.         have mail pending for other hosts, force that mail to be
  137.         delivered before upgrading your host.
  138.  
  139. 2.      Rebuild Queues. Rebuild all existing queue files to ensure they
  140.         are in the correct format.  Use the Rebuild all queues option
  141.         from the MHS Utilities menu.
  142.  
  143. 3.      Back up the existing SYS, MAIL and EXE subdirectories before
  144.         proceeding with the upgrade.
  145.  
  146.  
  147. Upgrading Your Host
  148. -------------------
  149.  
  150. Follow the instructions below to upgrade your host.
  151.  
  152. 1.      Set the MV environment parameter to point to the path containing
  153.         the MHS subdirectory.  For example, if NetWare MHS is installed
  154.         in d:\EMAIL, enter the command "SET MV=d:\EMAIL".
  155.  
  156. 2.      Run UPGRADE. The UPGRADE program warns you to back up the SYS
  157.         and EXE subdirectories, and displays the path constructed from
  158.         the MV environment parameter.  It prompts, Is it OK to continue
  159.         (Y/N):
  160.  
  161. 3.      Type "Y" if you have performed the backup, and if the target
  162.         directory is correct. Otherwise, type "N".
  163.  
  164.         If you enter "Y" in response to the previous prompt, the program
  165.         upgrades your NetWare MHS installation.
  166.  
  167. 4.      If you plan to connect to the CompuServe Mail hub, print
  168.         MANUAL.DOC, located in the <mv>\MHS\SYS directory, and follow
  169.         the instructions in that document.  It will tell you how to
  170.         configure the CompuServe Mail Hub and register your workgroups
  171.         and hosts with CompuServe.
  172.  
  173. 5.      Run the Directory Manager at least once after upgrading your
  174.         host. The  Directory Manager automatically updates the MHS
  175.         version number and serial number in the Routing Directory
  176.         (NETDIR.TAB).
  177.  
  178.  
  179. DOCUMENTATION CORRECTIONS
  180. -------------------------
  181.  
  182. This section provides updates and corrections to the NetWare MHS
  183. Installation and Operation guide.
  184.  
  185.  
  186. Passwords for Asynchronously-Connected Hosts
  187. --------------------------------------------
  188.  
  189. The NetWare Installation and Operation guide incorrectly describes how
  190. to define passwords for hosts with which you communicate asynchronously.
  191.  
  192. You can define a Password for access to hubs in the MHS HOST SETUP form.
  193. This is the password that the local host transmits when it communicates
  194. with a remote host.  (It transmits the same password to all the remote
  195. hosts with which it communicates.)
  196.  
  197. For each remote host the local host calls, and for each remote host that
  198. calls the local host, you can define a Password (in the A HOST THAT THIS
  199. HOST PHONES and the A HOST THAT PHONES THIS HOST forms, respectively).
  200. This Password must match the password defined in the Password for access
  201. to hubs field in the remote host's HOST SETUP form.
  202.  
  203. If you do not define the remote host's password at your local host, MHS
  204. will take the password transmitted by the remote host in the next
  205. communication session, and write it in the Password field of the A HOST
  206. THAT THIS HOST PHONES or the A HOST THAT PHONES THIS HOST form.
  207.  
  208. Once a password has been assigned to a remote host, the remote host
  209. administrator must notify you of changes to the password.  When the
  210. remote administrator changes the password in the Password for access to
  211. hubs field, the local administrator must change the Password field in
  212. the A HOST THAT THIS HOST PHONES or the A HOST THAT PHONES THIS HOST
  213. form for the remote host.  Otherwise, if Require Password is set to
  214. "Yes," a password mismatch will occur, and the hosts will be unable to
  215. establish a communication session.
  216.  
  217. Similarly, when you change the password in the Password for access to
  218. hubs field, you must ask the administrator of the remote host to update
  219. the Password in the form for your host.
  220.  
  221. To understand how passwords work, consider "Eng," a host that calls
  222. another host named "Sales." Sales has chosen "salpas" as its Password
  223. for access to hubs, and Eng has chosen "engpas" as its Password for
  224. access to hubs.  These passwords are defined in the HOST SETUP form.
  225.  
  226. The administrators at Sales and Eng can get together and coordinate
  227. passwords.  Sales' administrator enters "engpas" in the Password field
  228. of the A HOST THAT THIS HOST PHONES form that defines the route to Eng.
  229. And Eng's administrator enters "salpas" in the Password field of the A
  230. HOST THAT PHONES THIS HOST form that defines the route to Sales.  Both
  231. administrators can also set Require Password to "Yes."
  232.  
  233. One or both administrators can choose not to define the password for the
  234. other host.  If they leave the Password for the remote host blank, MHS
  235. will insert the password it receives during the next communication
  236. session.  During this session, Eng's host transmits its password.
  237. Sales' host enters the password received from Eng in its routing table,
  238. and sends its password to Eng's host.  Eng's MHS enters the Sales
  239. password in its routing table, and continues the transmission.
  240.  
  241. From now on, if either administrator changes their host's Password for
  242. access to hubs, they must ask the other administrator to change the
  243. Password field in the A HOST THAT THIS HOST PHONES or A HOST THAT PHONES
  244. THIS HOST form for the remote host.
  245.  
  246.  
  247. 96V32 and 96V32HUB Modem Driver
  248. -------------------------------
  249.  
  250. The 96V32 and 96V32HUB are not drivers for the Hayes Smartmodem, as
  251. stated in the NetWare MHS Installation and Operation guide.  They are
  252. drivers for the Hayes V-series ULTRA modem.
  253.  
  254.  
  255. FEATURES OF NETWARE MHS v1.5 REV. D
  256. -----------------------------------
  257.  
  258. NetWare MHS v1.5P Rev. D incorporates the following new and revised
  259. features.
  260.  
  261.  
  262. Communication Enhancements and Improvements
  263. -------------------------------------------
  264.  
  265. NetWare MHS v1.5 includes the following enhancements and improvements
  266. for communication between hosts:
  267.  
  268. o       Connection to CompuServe. Through NetWare MHS v1.5 Rev. D, you
  269.         can use the CompuServe Mail Hub to route mail between NetWare
  270.         MHS workgroups, members of the CompuServe Information Service,
  271.         and other users of CompuServe Mail.
  272.  
  273. o       Session Recovery. The Connectivity Manager resumes
  274.         transmissions where it left off when a broken transmission
  275.         restarts.
  276.  
  277. o       Abort and Retry Captured. When a network error occurs, the I/O
  278.         operation is retried.  If the retry count has been exhausted,
  279.         the Connectivity Manager or gateway is restarted.  The
  280.         Abort/Retry counter is reset after a successful connection.
  281.  
  282. o       Retry Counter Reset. The Retry counter now resets after a
  283.         successful connection to another host.  Previously, this
  284.         function was disabled.
  285.  
  286. o       Expanded Serial Port Support.  NetWare MHS supports modems on
  287.         serial ports COM3 and COM4.
  288.  
  289. o       Support for 9600 Baud Modems. NetWare MHS v1.5 supports 9600
  290.         baud modems.
  291.  
  292. o       Improved Modem Support. To support new modems with software
  293.         UARTs that use only one stop bit for communication, NetWare MHS
  294.         v1.5 uses only 1 stop bit.  It also supports modem definitions
  295.         with large command sets.  Included with this release are
  296.         versions of the MHS v1.5 modem drivers that handle hang-ups
  297.         properly with CompuServe.  If you are using any of the drivers
  298.         that came with your MHS v1.5 Rev. A software, you must use the
  299.         equivalents included with this release.
  300.  
  301. o       Support for Additional Modem Drivers. NetWare MHS now supports
  302.         the following modem drivers:
  303.  
  304.     2400B        For Hayes Smartmodem 2400 and Hayes-compatible modems
  305.                  operating at 2400 baud.  Use for calling hosts only.
  306.     2400B-CE     For modems bundled with the COMPAQ LTE.  Try using
  307.                  the CMPQLTEB modem driver first.
  308.     2400B-HUB    For Hayes Smartmodem 2400 and Hayes-compatible modems
  309.                  operating at 2400 baud.
  310.     96V32        For Hayes V-Series ULTRA 9600 modems.  Use for calling
  311.                  hosts only.
  312.     96V32HUB     For Hayes V-Series ULTRA 9600 modems.
  313.     BULLET96     For E-Tech BulletModem E9696M modems without MNP.
  314.     BULLETEC     For E-Tech BulletModem E9696M modems with MNP.
  315.     CODX3220     For Codex 3220 modems.
  316.     CODX3260     For Codex 3260 modems.
  317.     COMPQLTEB    For modems bundled with the COMPAQ LTE.  Try this modem
  318.                  driver first; if port off-line or other messages
  319.                  appear, try using 2400B-CE.
  320.     DISABLED     To disable asynchronous activity.  For hosts that do
  321.                  not exchange messages with remote hosts through
  322.                  telephone calls.
  323.     FAXMDM       For generic SendFax-compatible modems.
  324.     HAYESMAN     For Hayes-compatible modems that require telephone
  325.                  numbers to be dialed manually.
  326.     HAYES-UN     For Hayes-compatible modems operating at speeds up to
  327.                  2400 baud.
  328.     HAYESX24     For generic Hayes-compatible 2400 baud modems.
  329.     HAYESSM      For Hayes Smartmodem 2400 modems.
  330.     HSTD-HUB     For US Robotics COURIER HST modems with MNP.
  331.     HSTDNMNP     For US Robotics COURIER HST modems without MNP.
  332.     HULTRA       For Hayes V_Series ULTRA Smartmodem 9600 modems.
  333.                  Replaces the 96V32 and 96V32HUB drivers.
  334.     INTELFAX     For the Intel SatisFAXtion board.
  335.     INTELV32     For Intel 9600EX modems.
  336.     MICROCOM     For Microcom QX4232HS modems.
  337.     MULTEC       For MultiTech 932/224 modems.  This driver does not
  338.                  alter Novram setup.
  339.     MULTECNR     For MultiTech 932/224 modems.  This driver alters
  340.                  Novram setup.
  341.     MULTEC20     For older MultiTech 224 modems.  This driver does not
  342.                  alter Novram setup.
  343.     NEC9631      For NEC 9631 modems.
  344.     NEC9632      For NEC 9632 modems.
  345.     NULLMDM      For hosts with a direct cable connection between their
  346.                  communication ports.  You can use NULLMDM as a platform
  347.                  for developing modem-control files.
  348.     PP96-HUB     For Practical Peripherals PM9600SA modems. Use for
  349.                  both hubs and calling hosts.
  350.     UDS322X      For Motorola UDS v. 3224/3225 and Codex 1133 modems.
  351.  
  352.         This list supersedes the one in Appendix C of the NetWare MHS
  353.         Installation and Operation guide.
  354.  
  355.         Note:  If you want to use one of these modem drivers, refer to
  356.         the MODEM.DOC file in the <mv>\MHS\SYS directory for
  357.         installation instructions.
  358.  
  359.  
  360. SMF Enhancements and Improvements
  361. ---------------------------------
  362.  
  363. NetWare MHS v1.5 includes the following enhancements and improvements to
  364. the SMF standard:
  365.  
  366. o       Support for Extended Addresses. While MHS v1.5 Rev. D does not
  367.         use extended addresses to route messages, it now examines
  368.         extended address elements in braces ({ }) when checking for
  369.         duplicate addresses.
  370.  
  371.         For example, a message contains the following addresses:
  372.  
  373.         mail@fax {FAX: 1-408-555-1212}
  374.         mail@fax {FAX: 1-408-555-1211}
  375.  
  376.         Previously, MHS would compare only the base address (mail@fax).
  377.         Since the base address is the same in both instances, MHS v1.5
  378.         would only deliver one message, containing the first address, to
  379.         the fax gateway.  MHS v1.5 Rev. D recognizes the two addresses
  380.         as distinct, and delivers two copies to the fax gateway.  Note
  381.         that MHS does not interpret the contents of the braces; it only
  382.         detects that they are different.  Thus, if in the above example,
  383.         the addresses were:
  384.  
  385.         mail@fax {FAX: 1-(408)-555-1212}
  386.         mail@fax {FAX: 1-408-555-1212}
  387.  
  388.         then MHS would send two copies.
  389.  
  390.         This change supersedes the information in the SMF v70
  391.         Programmer's Reference.
  392.  
  393.  
  394. GENERAL INFORMATION
  395. -------------------
  396.  
  397. The following information applies to installations running
  398. NetWare MHS v1.5.
  399.  
  400.  
  401. User Interface Information
  402. --------------------------
  403.  
  404. The following information applies to the user interface in NetWare MHS
  405. v1.5:
  406.  
  407. o       Monochrome Monitor Problems. The MHS screens may be difficult
  408.         or impossible to read on certain VGA monochrome monitors.  If
  409.         you experience this problem, use the following MODE command at
  410.         the DOS prompt before running MHS:
  411.  
  412.         MODE=bw80
  413.  
  414. o       Color Monitor Problems. If the colors on an application display
  415.         incorrectly after you run MHS, use the following MODE command at
  416.         the DOS prompt before running your application:
  417.  
  418.         MODE=co80
  419.  
  420. o       Null Username. The Directory Manager treats "" (null; a
  421.         username with no characters) as a valid username.  Therefore,
  422.         check to make sure you have specified a username before you add
  423.         a new user.
  424.  
  425. o       Connection Activities Window. You cannot view the Connection
  426.         Activities window twice in a row.
  427.  
  428. o       Default Primary Host. In new installations, the default primary
  429.         host for non-routing internet hosts is NHUB.  If you accept the
  430.         default value, mail will not be delivered to or routed from the
  431.         non-routing host.
  432.  
  433.  
  434. Communications Information
  435. --------------------------
  436.  
  437. The following information applies to communications between hosts
  438. running NetWare MHS v1.5.
  439.  
  440. o       Modem Speed Sensing. The superseded modem drivers for the Hayes
  441.         V-Series ULTRA 9600 modem (96V32 and 96V32HUB) do not sense
  442.         speed.  As a result, they are unable to answer an incoming call
  443.         at 1200 or 2400 baud.  If you want speed sensing, use the HULTRA
  444.         modem driver.
  445.  
  446. o       9600 Baud Modem Support. PCs with 8088 processors running at
  447.         the 4.77 MHz clock speed are not fast enough to use 9600-baud
  448.         modems.
  449.  
  450. o       Inaccurate Estimated Transfer Time. MHS attempts to estimate
  451.         the amount of time an asynchronous transfer will take.  It often
  452.         estimates incorrectly, especially for high-speed modems.
  453.  
  454.  
  455. Disk Space and Memory Requirements
  456. ----------------------------------
  457.  
  458. Disk space and memory requirements for NetWare MHS v1.5 have changed, as
  459. follows:
  460.  
  461. o       Statistics Gathering. Because NetWare MHS v1.5 gathers
  462.         statistics more comprehensively, statistics files require more
  463.         disk space.  Monitor disk space usage carefully.
  464.  
  465. o       Memory Allocation Error. If the NetWare MHS workstation has a
  466.         limited amount of available memory, and a large number of files
  467.         accumulate in the SND directory, a memory allocation error
  468.         occurs.  Delete any *.BAD files in the SND directory and, if
  469.         possible, terminate memory-resident programs sharing the MHS
  470.         workstation.  Do not run MHS from a shell.
  471.  
  472. o       Disk Space Management. If MHS terminates abnormally, it might
  473.         be unable to remove temporary files created in the <mv>\MHS\SW
  474.         subdirectory.  Check this subdirectory from time to time, and
  475.         delete all files except SWAP.FLG.  Note:  Do not delete these
  476.         files while MHS is running.
  477.  
  478.  
  479. Other Information
  480. -----------------
  481.  
  482. The following information applies to NetWare MHS v1.5:
  483.  
  484. o       Invalid Remote Host Name. MHSUSER does not prevent you from
  485.         adding an invalid remote host name (for example, a name
  486.         containing invalid characters) to the Routing Directory.  To
  487.         avoid confusion and routing problems, delete invalid host names.
  488.  
  489.  
  490. FIXES IN THIS REVISION
  491. ----------------------
  492.  
  493. 1)      When MHS messages are upgraded from SMF-64 to SMF-70, MHS might
  494.         reject the message indicating "Bad Expiry Date Header".  This
  495.         problem occurred every 256 days; the last known date on which it
  496.         occurred was January 7, 1992.
  497.  
  498. 2)      MHS would fail when it connected to the Compuserve Mail Hub from
  499.         outside the United States, if the connection was made through a
  500.         data network that uses 7-bit data.
  501.  
  502. 3)      Although it was using the "DISABLED" modem driver, MHS would
  503.         still require the selected COM port to be present, and would
  504.         alter the settings of that COM port.  MHS no longer accesses the
  505.         COM port when using the "DISABLED" modem driver.
  506.  
  507. 4)      Under some circumstances, the MHS workstation would hang if
  508.         activity occurred on the COM PORT while a gateway was running.
  509.  
  510. 5)      Sometimes during message queue transfers, the warning message
  511.         "Dangerous stuff" would appear.  The condition causing this
  512.         problem has been eliminated.
  513.  
  514. 6)      On faster machines, the Connectivity Manager would sometimes
  515.         terminate with a fatal runtime (division by zero) error.
  516.  
  517. 7)      Mhsuser - Option -X01 - When defining a new user of an
  518.         application, mhsuser would allow you to add users if you
  519.         provided an undefined application.  MHSUSER will no longer
  520.         allow you to define a user to an undefined application.
  521.  
  522. 8)      Mhsuser - Option -X31 - The switch -NS for adding / modifying
  523.         information for the CompuServe host's configuration would only
  524.         work for the initial creation of the Cserve host.  MHSUSER
  525.         now lets you add and modify the information for the CompuServe
  526.         host.
  527.  
  528.  
  529. TRADEMARKS
  530. ----------
  531.  
  532. Novell, the N design, and NetWare are registered trademarks and NetWare
  533. MHS is a trademark of Novell, Inc.
  534.  
  535. Codex is a registered trademark of Codex Corporation.  COMPAQ is a
  536. registered trademark of COMPAQ Computer Corporation.  CompuServe is a
  537. registered trademark of CompuServe, Inc.  E9696M and BulletModem are
  538. trademarks of E-Tech Research, Inc.  Hayes and V-series are registered
  539. trademarks and ULTRA and Smartmodem are trademarks of Hayes
  540. Microcomputer Products, Inc.  Intel is a registered trademark and
  541. SatisFAXtion is a trademark of Intel Corporation.  IBM and PS/2 are
  542. registered trademarks of International Business Machines Corporation.
  543. Microcom and MNP are trademarks of Microcom, Inc.  MS-DOS is a
  544. registered trademark of Microsoft Corporation.  Motorola is a registered
  545. trademark of Motorola, Inc.  NEC is a registered trademark of NEC
  546. Corporation.  Practical Peripherals is a registered trademark and
  547. PM9600SA is a trademark of Practical Peripherals, Inc.  USRobotics is a
  548. registered trademark and COURIER, HST, and ASL are trademarks of U.S.
  549. Robotics, Inc.
  550.